Tag Archives: photoshop

SMD Grassy Textured Text Tutorial

By special request…

The following tutorial will be written for the basic to intermediate understanding of Photoshop. If any steps are not clear or need to be elaborated, please feel free to ask. For the sake of brevity, let’s begin.

Step 1

Begin in Adobe Illustrator. Create your vector.

SMD Textured Text Tutorial 01

Step 2

With the vector selected, go to Effect — 3D — Extrude and Bevel.

SMD Textured Text Tutorial 02

Step 3

Adjust the settings in the dialog box to your liking. You have many options to manipulate. The x,y,z coordinates, Perspective depth, Extrude depth, Bevel settings, Capping, and Shading settings. The settings I used and the results are shown below.

SMD Textured Text Tutorial 03SMD Textured Text Tutorial 04

Step 4

Next, after the Extrude and Bevel has been applied, Expand the Appearance.

SMD Textured Text Tutorial 05

Once the Object has been expanded, you should see something similar to what is shown below.

SMD Textured Text Tutorial 06

Step 5

Deselect the Object. Choose the Direct Selection Tool from the toolbar. (The white arrow as opposed to the solid black arrow). With the Direct Selection Tool, select the face of the vector object and change the color. This will aid in the selection process later on in this tutorial.

SMD Textured Text Tutorial 07

Step 6

Now it’s time to begin moving this object into Photoshop. Open Photoshop. Create a New Document. Select the face of your vector in Illustrator. Copy. (CMD-C) Paste the copied vector into the Photoshop Document.

SMD Textured Text Tutorial 08

Continue this process for the remaining back and side elements, individually copying from Illustrator and Pasting into the Photoshop Document.

SMD Textured Text Tutorial 09

Step 7

Once you have completed pasting and aligning your elements into the Photoshop document, it’s time to create some order in the Layer’s Palette. I have ordered each letter into its own subfolder, the face being above the background.

SMD Textured Text Tutorial 10

Step 8

It’s time to bring in some texture. Open your texture file and copy and paste the texture into your Photoshop document. (click on the image to visit the source)

SMD Textured Text Tutorial 11SMD Textured Text Tutorial 12

Step 9

Now that you have chosen the texture you will be applying, it’s time to put it aside for one moment and create our selections. (We moved the texture into the document now instead of later so you can see up close how your texture will relate to your vector.)

Let’s begin with the face. Either by using the magic wand tool, or by command clicking on the appropriate layer’s thumbnail, create a selection that encompasses the face of your “vector.”

SMD Textured Text Tutorial 13

Now using the Lasso Selection Tool, we want to “roughen” the selection a bit. While holding the SHIFT key, begin to add to the edge of your selection, mimicking your chosen texture.

SMD Textured Text Tutorial 14

Now, Save the selection by going to Select — Save Selection.

Picture 8

Name the saved selection appropriately. I named this selection S-Face.

SMD Textured Text Tutorial 15

Repeat this step for the remaining faces.

Step 10

Next, we need to create and save selections for the back of the “vectors.” Load the face selection for the appropriate back we will be working on. Next, COMMAND–SHIFT–Click the thumbnail in the layers palette for the chosen back.

SMD Textured Text Tutorial 16

Add to this selection, again, mimicking the chosen texture. Save and Name this selection and then repeat for the remaining “vectors.”

Step 11

Now it’s back to the texture we moved in. Duplicate the layer, CMD-J. Move the duplicate layer to the appropriate subfolder for the “vector” you will be working with. Resize the texture accordingly to meet your desired effect.

SMD Textured Text Tutorial 16

Copy and paste this texture, tiling the texture to cover the entire “vector.”

SMD Textured Text Tutorial 17

With every texture layer highlighted in the layer’s palette…

SMD Textured Text Tutorial 18

… Merge these layers.

SMD Textured Text Tutorial 19

With all the textures now resting in one layer…

SMD Textured Text Tutorial 20

… it’s time to make the texture seamless, losing it’s tiled and repetitive appearance. Using the Clone-Stamp Tool…

SMD Textured Text Tutorial 21

…with a soft brush, clone away the gaps, seams, and noticeable repeating patterns.

Step 12

Now that the texture is ready for use, it’s time to load a selection.

SMD Textured Text Tutorial 22

SMD Textured Text Tutorial 23

Now, with the selection loaded, and the texture layer highlighted in the layer’s palette, press CMD-J to duplicate the layer. (With the selection active, pressing cmd-j should duplicate the texture layer only where the selection is active giving the results shown below)

SMD Textured Text Tutorial 24

Repeat this step for the back using the saved back selection.

SMD Textured Text Tutorial 25

Repeat this step for the remaining “vectors.”

Step 13

Now it’s time to work on the beginning stages of shading. If the pasted back “vector” is a smart object, it’s time to rasterize the layer. With the layer highlighted, press CMD-U. This will bring up a Hue/Saturation dialog box. Bring the saturation all the way to the left completely desaturating the layer.

SMD Textured Text Tutorial 25

Step 14

With the “shade” back layer still highlighted, load the back selection. Using the clone tool, bring the shade all the way to the edge of the selection. (Remember, the selection is mimicking the texture while the shade layers edge is still crisp and clean. We want to have the shade layers edge match the texture’s layer edge.)

With the edges matching, and the selection still active, we will want to use the blur tool to help remove any banding (the hard color breaks between shades) that Illustrator may have created.

SMD Textured Text Tutorial 27

Once that’s done, set the shade layer to Multiply. You may want to adjust the layer’s Opacity setting depending on your desired darkness.SMD Textured Text Tutorial 28

Repeat step 14 for the remaining “vectors/shapes.”

SMD Textured Text Tutorial 29

If you are not satisfied with the Multiply setting for the shade layers, you may want to experiment with different transparency modes. I found for my needs, that Linear Light worked better for the outside letter, while Multiply was satisfactory for the other two.

SMD Textured Text Tutorial 30

Don’t forget to name your layers appropriately to it’s contents. This will help keep all future edits a little simpler. (We no long need the original face layers for each individual shape. Feel free to disregard these layers.)

Step 16

For a little fine-tunning, break out the burn, dodge, and sponge tool. This takes experimentation to get just right, but by using these three tools, you can really add to the depth of your design.

SMD Textured Text Tutorial 31

You can use these tools on the texture and the shade layers, giving you different results. You can also determine the exposure (strength) level of the tool, along with the brush size. You can even dictate whether the tool affects the shadows, midtones or highlights. These tools are only limited to your experimentation, and experimentation is extremely encouraged to find suitable results.

SMD Textured Text Tutorial 33

Step 17

Grass Time! Open the Grass Texture. Place, Import, Copy and Paste, just get that grass texture into the document. Resize the grass to match your needs. Make sure the grass texture is large enough and covers the entire face of your shape, “individually.” DO NOT tile and repeat the grass texture like you did with the dirt texture. Click here for the grass file source.

SMD Textured Text Tutorial 35

Step 18

With the grass texture covering your first shapes face, load the saved selection for the face that was used for the dirt texture.

SMD Textured Text Tutorial 36

Now, using the Lasso Selection Tool, add to the selection, mimicking the grassy texture. It doesnt need to be perfect, but try following the blades of grass as closely as possible without being obsessive about it, unless you just feel the need to burn an exuberant amount of time.

SMD Textured Text Tutorial 37

No need to save this selection, unless you just want to. With the selection active, and the grass texture layer highlighted, Duplicate the layer, CMD-J. Again, this should only duplicate the grassy texture layer where the selection was active.

Okay, now comes the tiresome part. Go back to the grassy texture layer, the one before the selection duplication was applied. Flip or rotate this layer, careful that you are still completely covering the shapes face. Now, repeat the entire face selection creation and duplication process. In total, there will be two grassy textured layers for each shapes face. They need to have different selections from each other, this way the blades of grass on the edges of each layer are different from one  another.

SMD Textured Text Tutorial 38

Repeat this ENTIRE STEP for the remaining shapes faces.

Step 19

Inside each subfolder, your layers should be ordered with two grass layers, a dirt face layer, a shade layer, then a bottom/back dirt layer.

For the top grass layer, we want to add a bevel/emboss layer effect. Experimenting with the settings are essential, my settings used are shown below.

SMD Textured Text Tutorial 39

For the second grass layer, we want to apply a different bevel/emboss layer effect along with a color overlay layer effect. Again experimentation, but my settings used are shown below accordingly.

SMD Textured Text Tutorial 40SMD Textured Text Tutorial 41

Here is a view of how my layers are ordered and where the layer effects are applied.

SMD Textured Text Tutorial 42

(As you can see, I went back duplicated and modified the shading layer. Again experiment to find the best results. I also went back and worked with the burn and dodge tools a a bit more. After applying the grass texture I saw more areas that needed a little help.)

Step 20

Here are the results thus far.

SMD Textured Text Tutorial 43

I tried to keep this tutorial short and sweet, but as you can see, there is much more that can be done. However, that exceeds the scope and purpose of this tutorial. Adding a ground shadow and some dust are near essential. Adding elements like falling dirt or blowing grass can help add movement and excitement to the image. Background colors and additional elements can help aid in the mood of your image. Afterwards, using color correction layers and sharpening techniques such as the highpass filter can add to the image as well.

SMD-Dirt-Grass-Tutorial

I hope you’ve enjoyed the tutorial, if you have any questions, or would like to add any tips of your own, please feel free to message me or add a comment!

To view the final image at a larger size, click here.

Advertisements

SadMonkey’s Photo Stencil Tutorial

The following tutorial will cover in brief detail, how to create a 2 layer “photo” stencil in Adobe Photoshop.  The tutorial is meant for at least intermediate knowledge of Photoshop.

Step 1

First, you will want to completely desaturate your image giving you a monochromatic image. Next, for a two color stencil, you will want to create two separate layers. The top layer will be the darks, the second layer will be for the midtones. You can easily do this by putting your magic wand tool to use on the grey-scale image. Select the darks. With an active selection, activate your dark layer in the layers palette, and fill with black. Repeat the step for the midtones.

sadmonkey-bond-tut-01

Step 2

Now you will want to clean that dirty selection up. Using the pen tool outline your dark colors. The pen tool gives you sharp, clean edges and leaves you with the flexibility of adding your personal style. The amount of detail is up to personal preference. To may make it easier, when outlining, lower your opacity level so you will be able to see exactly what your doing and where you are going around the image.

sadmonkey-bond-tut-02

Step 3

You will want to continue using your pen tool and outline your midtones. Be nice to yourself, change the color to something different from what you used for the darks. It also helps if your midtone pen/shape layers begin underneath the dark pen/shape layers. (It’s not necessary, but it helps) For the final effect later on, you want to be sure that you create your midtones to where there is not a dark layer that will not have a midtone layer underneath it.

sadmonkey-bond-tut-03

Step 4

Okay, before we do anything else, hide the magic wand filled layers, only leaving your pen selections and solid white background. Go back, and make sure all your opacity levels are now back to 100%. Rasterize all layers. Making sure all your dark layers are on top and in order, merge all the dark layers onto one layer. Next, merge all your midtone layers into one layer. You should now have, one dark layer, one midtone layer, and your white background. If you are happy with the results, you can now delete your magic wand layers.

sadmonkey-bond-tut-04

Step 5

Now you are going to want to go image hunting. Feel free to use whatever you wish. I like to use images that tend to me synonymous with my characters. For example, with this James Bond image, I am using a hand gun, a wrist watch, a bow tie and a martini glass. Once you’ve found your images, open them in Photoshop, isolate them, and bring them into your stencil document. Make several copies of each item varying the size and orientation of each image to help randomize our coming effect.

sadmonkey-bond-tut-05

Step 6

Next, make a mess with the images. Go crazy making copies all over until the entire canvas is covered. Make sure the ENTIRE canvas is covered and there are no peepholes showing through. Once the entire canvas is covered, merge all those layers into one. (Be mindful not to merge your background, or stencil layers… only the new images you brought in.)

sadmonkey-bond-tut-06

Step 7

This will be what we use for our dark layer. In your layers palette, with this new layer selected, CMD-click on your dark stencil layer. This should make a selection of the entire dark layer. (Little ants should be marching on your screen) With the ants marching, and the new layer still selected, click on the quick mask button on the bottom of your layers palette. (It’s the grey little square with the white circle in the middle of it)

sadmonkey-bond-tut-07

Step 8

You will want to repeat steps 5, 6, and 7 for what will become your midtone layer. (Be sure to pick new images and maybe change up your pattern for this to be layer)

sadmonkey-bond-tut-08

Step 9

Now you should have two new layers. Your new collage dark layer and your new collage midtone layer. Feel free to hide your pen/stencil layers now. (You may not want to delete them. Beginning off, you may want to reuse them for recreating your clipping mask if you are unhappy with your results in the following steps)

We are now going to want to make our dark layer “dark” and our midtone layer ” a midtone.” Beginning with the dark layer, click on the preview thumbnail in your layers palette. Make sure your thumbnail is selected and not the clipping mask. Bring up your hue/saturation dialog box by hitting the CMD key and the “U” key. Check the box marked colorize. (This will give the entire layer a nice and clean mono-chormatic touch) Then move the sliders around making this layer all dark and pretty. sadmonkey-bond-tut-09

Step 10

Repeat the step for your midtones on the collage midtone layer.

Step 11

Now your dark layer and your midtone layer are ready for some fun. It’s time to break out the brushes. If you don’t already have a sweet collection of spray paint, watercolor, and splatter brushes the world wide web is full of them. For starters, try visiting Brusheezy.com or QBrushes.com and see what you can find.

sadmonkey-bond-tut-10

Step 12

Okay, we’re just about finished. Only a few final touches and we can call this baby done. Once you have made a mess that you’re happy with, we’re gonna want to merge all the visible layers. You can flatten the entire image, but I prefer to merge all visible layers by pressing Alt-Cmd-Shift-“E” This still allows you the ability to go back and edit your file without having to hit the undo button a gazillion times or having to save and open a new document.

sadmonkey-bond-tut-11

Step 13

Now, we’re gonna duplicate this new layer by pressing Cmd-“J” and run the high pass filter on it. With the new layer on top in the layers palette and selected, go to Filter-Other-HighPass. For this one, I ran the filter at 5.3. Then I changed the layers transparency mode to soft light and changed the opacity level to 85%.

Next I went back to the all merged layer, duplicated it again, ran the high pass filter on it again, but instead of using 5.3 as the setting, I changed it to 1.6. Then I set this layers transparency mode to hard light at 100% opacity. I duplicated this layer 2 more times.  This gives us a base layer of the all merged image, with one 5.3 highpass layer set to soft light 85% with three more high pass layers each set at 1.6, hardlight, 100% opacity.

sadmonkey-bond-tut-12

Step 14

For our final touch, under your adjustment layers, we will want to use the selective color option. This will allow us to fine tune our colors, darken the darks, lighten the lights, adjust the hues and saturations, so on and so forth…

sadmonkey-bond-tut-13

And that’s pretty much it. Depending on your file size, colors, image, layout and all your other variables… EXPERIMENT. There are no “one size fits all” setting or settings. Keep modifying your document until you get the results dialed in just the way you like.

SadMonkey Design-bond

Well there you have it. Let me know what you guys think.